Dimsoln Foundation3D 4.::::::English Description:::::: Foundation3D is a spread and combined footing analysis/design tool that completes soil or pile supported foundation for industrial equipment such as horizontal exchanger, horizontal vessel, vertical vessel or tower, pipe racks and other misce.....
Language : english Authorization: Retail Freshtime：2006-11-10 Size: 21MB
To create well logs. Utilising the possibility of data transfer with the drilled profile program GGU-STRATIG, you need only enter your horizon data once. The input of horizons can be carried out with user-defined abbreviations. The program can load and create the "SEP” data format. An optically hig.....
Language : english Authorization: Retail Freshtime：2006-11-10 Size: 2MB
Calculation of one-dimensional consolidation processes in multi-horizon systems using any pore water pressure distribution and time-dependent loading function.
Consolidation (numerically)
One-dimensional consolidation theory according to Terzaghi, for a multi-horizon system and any pore water press.....
Language : english Authorization: Retail Freshtime：2006-11-10 Size: 2.2MB
[img]http://www.ggu-software.com/software/ggu-computation/trench/schlitzwand_1.gif[/img]The GGU-TRENCH program allows the calculation and presentation of inner and outer stability of retaining wall laminae. For proof of stability of retaining wall laminae the following factors are calculated:Safety .....
Language : english Authorization: Retail Freshtime：2006-11-10 Size: 1.4MB
In situ permeability from borehole pumping tests.The following evaluation methods after Cooper-Jacob are supported: :• Time-drawdown method• Distance-drawdown method• Distance-time-drawdown methodThe following evaluation methods after Theis are supported::• Type curves method• Recovery metho.....
Language : English Authorization: Retail Freshtime：2006-11-10 Size: 1MB
[img]http://www.ggu-software.com/software/ggu-computation/transient/grundwassermodell_1.gif[/img]For a transient calculation of groundwater flow, a stable initial condition is required. This initial condition is found by the program GGU-TRANSIENT from a file (e.g. PLGW.DA1) which is created from a p.....
Language : english Authorization: Retail Freshtime：2006-11-10 Size: 1.8MB
[img]http://www.ggu-software.com/software/ggu-laboratory/triaxial/druckversuch_1.gif[/img]The test data can be entered by hand, if wished, or imported as an ASCII file. After the input of all relevant parameters the test results can immediately be presented graphically on the screen. You can choose .....
Language : english Authorization: Retail Freshtime：2006-11-10 Size: 1MB
3DEC (3-Dimensional Distinct Element Code) is the three-dimensional extension of Itasca‘s two-dimensional code UDEC. It is specifically designed for simulating either the quasi-static or dynamic response to loading of rock media containing multiple, intersecting joint structures. Main Feature.....
Language : english Authorization: Retail Freshtime：2006-11-10 Size: 3.7MB
FLEXIBLEFLAC3D is a continuum code that is used in analysis, testing, and design by geotechnical, civil, and mining engineers. FLAC3D has a large range of application because its analytical potential is not limited to a particular problem definition or type of analysis. FLAC3D is designed to accommo.....
Language : english Authorization: Retail Freshtime：2006-11-10 Size: 1.6MB
FLAC/Slope uses the graphical interface and the automatic factor-of-safety calculation of FLAC as the core of a new, user-friendly code that models slope stability problems under a wide variety of slope conditions. These include: arbitrary slope geometries, multiple layers, pore pressure conditions,.....
Language : english Authorization: Retail Freshtime：2006-11-10 Size: 16MB
(Particle Flow Code in 2 Dimensions; Particle Flow Code in 3 Dimensions) are programs for modeling the movement and interaction of assemblies of arbitrarily-sized circular (2D) or spherical (3D) particles. The particles are rigid but deform locally at contact points using a soft contact approach, i.....
Language : english Authorization: Retail Freshtime：2006-11-10 Size: 2MB
PFC2D and PFC3D (Particle Flow Code in 2 Dimensions; Particle Flow Code in 3 Dimensions) are programs for modeling the movement and interaction of assemblies of arbitrarily-sized circular (2D) or spherical (3D) particles. The particles are rigid but deform locally at contact points using a soft cont.....
Language : english Authorization: Retail Freshtime：2006-11-10 Size: 1MB
UDEC (Universal Distinct Element Code) is well suited for problems involving jointed rock systems or assemblages of discrete blocks subjected to quasi-static or dynamic conditions. UDEC addresses the engineering problems associated with mining, studies of deep underground isolation of radioactive ma.....
Language : english Authorization: Retail Freshtime：2006-11-10 Size: 6MB
The PROKON suite of structural analysis and design software is developed by engineers for engineers. Used worldwide in more than eighty countries, the suite provides quick and reliable answers to everyday structural and geotechnical engineering problems: Frame and finite element analysis Steel membe.....
Language : english Authorization: Retail Freshtime：2006-11-10 Size: 39MB
RockWare DigiData is an inexpensive and easy to use program for on -screen digitizing. Use it to spot wells, collect elevation from a contour map, or digitize curve information from a raster log. ..
Language : english Authorization: Retail Freshtime：2006-11-10 Size: 4MB
Established in 1988, 12D Solutions sells and supports its principal product suite, 12d Model (formerly known as 4d Model) direct and through distributors around the world. 12D Solutions clients include civil and water engineering consultants;environmental consultants; surveyors; local; state and nat.....
Language : english Authorization: Retail Freshtime：2006-11-06 Size: 563MB
Robust, fast and user-friendly tools are essential in geotechnical engineering. GeoDelft, the world-renowned Dutch geotechnical engineering and soil mechanics institute, realised this a long time ago. Since its foundation back in 1934, research and development at GeoDelft has been very important t.....
Language : english Authorization: Retail Freshtime：2006-11-06 Size: 14MB
[img]http://www.delftgeosystems.nl/files/images_org/dgs08.jpg[/img]Robust and fast Terzaghi model for vertical drainage:This concerns an extension to the traditional Barron-Carillo method. This method facilitates drainage systems for strips and ditches. The model can also deal with drainage systems .....
Language : english Authorization: Retail Freshtime：2006-11-05 Size: 18MB
Slope Stability Software for Soft Soil EngineeringThe safety and stability of the primary sea and river dikes is essential for the Netherlands since over half the population lives below sea level. In total, 3,500 kilometres of primary dikes and over 100,000 kilometres of other embankments keep the .....
Language : english Authorization: Retail Freshtime：2006-11-05 Size: 11MB
GGU-Retain allows the dimensioning of sheet pile walls, soldier pile wall , secant pile walls, bored pile walls and diaphragm walls.
The program offers comfortable data input with permanent presentation of the system on the screen. Every change of data is shown on the screen, so that optimum cont.....
Language : english Authorization: Retail Freshtime：2006-10-01 Size: 2.7MB
The GGU-SEEP program allows the calculation of the following installations for precipitation seepage according to
german ATV A-138 (January 2002):
• Surface seepage
• Depression seepage
• Pipe seepage
• Seepage in gravel filled drain trenches
• Shaft seepage
As data input is in accordance with .....
Language : english Authorization: Retail Freshtime：2006-10-01 Size: 934KB
Powerful mesh generator with mesh condenser and optimizer import of ASCII-Data Consideration of seepage lines and the unsaturated zone Definition of layer boundaries using fixed values or an interpolation mesh (data import of ASCII-Data of GGU-GEO GRAPH) Graphically oriented data input and editor fo.....
Language : english Authorization: Retail Freshtime：2006-10-01 Size: 1.3MB
A MiniCAD system is available for additional labelling of graphics. The output of the results in a protocol or as a diagram can be carried out on the screen, or to a printer or plotter.As data input is in accordance with Windows conventions it can be learnt almost without the use of a handbook. The .....
Language : english Authorization: Retail Freshtime：2006-10-01 Size: 919KB
Management and presentation of measurements in the form of walking lines and isographs. Data transfer with automatic measurement values (MDS) is possible. One area of application is, for example, the graphical presentation of groundwater depth in a set of sounding wells, over any period of time. If .....
Language : english Authorization: Retail Freshtime：2006-09-22 Size: 2MB
Quickly perform geostatistical analysisGeostatistics provides a way to better understand the autocorrelation inherent in spatial data – and to define and use this variation to make better estimates of values for places not sampled and thereby create optimal, unbiased maps. GS+ provides easy access.....
Language : english Authorization: Retail Freshtime：2006-09-21 Size: 20MB