VERICUT® software simulates NC machining to detect mistakes and inefficiency before prove-out!
VERICUT software simulates NC machining to detect tool path errors and inefficient motion. During the part programming stage, you can eliminate errors that could ruin the part, damage the fixture, break the cutting tool, or crash the machine – without doing a single prove-out on the machine! |
You can model and simulate any machine in your shop!
| |
· 2-3 Axis |
· Multi Axis |
· Milling |
| |
· Drilling |
· Turning |
· Mill/Turn |
| |
· EDM |
|
|
|
|
SIMULATION: A powerful inspection tool… 3D solid simulation of the workpiece and NC machine tool enable you to visualize the machining exactly as it occurs on the shop floor.
VERIFICATION: Correct tool path errors before machining… VERICUT detects fast feed errors, potential crashes/collisions, gouges, over/undercutting, etc.
ANALYSIS: Verify dimensional accuracy… VERICUT includes comprehensive analysis tools for measuring, cross-sectioning the part to make sure the machined will exactly match the design intent.
OPTIMIZATION: Run NC machine tools at the maximum efficiency level possible… VERICUT automatically determines the best feed rates for every portion of the tool path and adjusts them based on the cutting conditions. |
NC Program Review Enhancements
A new “NC Program Preview” offers an option to process an NC program in VERICUT without actually simulating material being removed. This “quick check” is very fast and uses much less memory. When in preview mode, VERICUT displays a tool trace of the NC program over the design model. At the end of the preview VERICUT enters NC Program Review mode. Preview checks for collisions, gouges, minimum excess and instances where axis limits are exceeded. Several new utilities have been added to the NC Program Info window. These include: a Calculator, and user-configurable text Coloring, syntax checking and block renumbering options. The syntax check enables you to check the NC program for syntax errors based on a user defined set of criteria. This feature is also accessible from the NC Program Review editor. You can turn On/Off VERICUT defined syntax checking rules (error conditions) and define custom syntax checking error conditions. For those who manually create and edit NC programs, you can now position your to
ol on the part using the MDI window and transfer the created NC blocks directly into the NC program.
New Tool Setup Wizards
Complimenting the milling tool setup wizard introduced in VERICUT 6.0, a turret setup wizard has been added. The new Turret Setup enables you to easily load, change tools, or change tool positions in a turret. You can also easily create a swept model of a turret. The Tool Manager has also been enhanced to enable you to describe the shape, position, and orientation of a waterjet cutter or a tap in a tap tool assembly. Simulate Tapping
VERICUT now supports simulation and analysis of tapping operations. Tapped holes are visually differentiated from other drilled/bored/reamed holes. VERICUT checks for correct feed rate and direction when using a tap tool, and also detects if the tap hole is pre-drilled too small.